3 axis Nema 23 Stepper Motor 270oz-in 3A +3 Axis Driver Board CNC Kit hobby

$125.0 Buy It Now or Best Offer
free,30-Day Returns

Seller Store longsmotor99
(6285) 97.2%,

Location: Changzhou City, Jiangsu Province
Ships to: US,
Item: 303183551049

Return shipping will be paid by:Buyer
All returns accepted:Returns Accepted
Item must be returned within:30 Days
Refund will be given as:Money Back
Return policy details:
23HS8630 TB6560:23HS8630 TB6560
Country/Region of Manufacture:China
MPN:C01111A57014
Longs Motor:Longs Motor

This item includes: 3 pcs Nema 23 stepper motor 270 oz.in,3A, bioplar 1 pc 3 Axis Driver Board TB6560 3.5A,16 Micsteps 1 pc Power Supply 350Watts( 24VDC/14.6A) 1 pc parallel cable & CD( mach3) free offering when you bought above Detailed information : 1. Nema 23 stepper motor: Model Step angel (°) Motor Length L(mm) Rate Voltage (V) Rate Current (A) Phase Resistance (Ω) Phase Inductance (mH) Holding Torque (oz.in) Lead Wire (NO.) Rotor Inertia (g.cm2) Detent Torque (kg.cm) Motor Weight (kg) 23HS8630 1.8 78 3 3 1.0 6.4 270 6 480 0.68 1 2. 3 Axis Driverbaord TB6560 Product Features:• Toshiba TB6560AHQ chip – High power, maximum 3.5Adrive current chipset !• 1-1/16 microstep setting – Higher accuracy and smoother operation than standard 1, 1/2 step!• Adjustable drive current settings for each axis – 25%,50%,75%,100% of full current can be set for differentstepper motors• Overload, over-current and over-temperature safety – Full protection for your computer and peripheralequipment!• On board current switching – Power output can be set according to specific user requirement!• Full closed-type optical isolation to protect the user’s computer and equipment• Relay spindle interface – Outputs Max. 36V 7.5A for spindle motors or coolant pump (only one device can bepowered by this output!)• 4 channel inputs interface- Can be used for XYZ limit and emergency stop !• Professional design – Two stage signal processing with super anti-jamming !• Bipolar constant current chopper drive with non-resonant region – Controls motors smoothly through rangewithout creep effect!• Four control inputs (divided into pairs of knives) – Allows setting of limit and emergency stop !• Universal architecture – Supports most parallel software MACH3,KCAM4,EMC2 etc!Dip settings: Current Setting12Decay Mode Settings34MicroStep Settings56100%ONONFASTONON1ONON75%ONOFF25%ONOFF1/2ONOFF50%OFFON50%OFFON1/8OFFOFF25%OFFOFFSLOWOFFOFF1/16OFFON * Important Notes:• Power supply DC 12-36V (not included)★Voltage Selection:12-16VDC power supply for Nema 17 stepper motors 16-24VDC power supply for Nema 23 stepper motors 24-36VDC power supply for Nema 34 stepper motors(High voltage will burn up the chips or stepper motors!!!) *Ampertage Selection:Output current of the power supply can be calculated by the following expressions: Output current = Rated current of your stepper motors * quantity + 2A (For example, if you want to drive 3 * 3A Nema 23 stepper motors, theoretically 24V 11A DC power supply is recommended, but higher power such as 24 V 15A also will be good.If you are not sure about the selection of power supply, please feel free to contact us for help)• The power output of12V shall be applied to the radiator fan of 12V• Driver output compatible with 2 or4 phase, 4,6 or 8 lead stepper motors, 3A max.• Suitable for unipolar or bipolar stepper motors.• Voltage regulated spindle speed controlled by parallel interface as function of supply voltage. Firstly,Motor wiring connection is right. Second.the three axis driver card must be set up according to the requirements of our product manual. Especially motor outputs and output singnals settings according to our product manual is right. Third,You must use the XP system desktop computers.You can only use the parallel conversion card Four,it need use mach3 software.You can download mach3 software on our company website. If you want product manual,please send e-mail to me.If you have problem when setting,please send e-mail to me. 3.Power supply—-350W-24VDC The power is 350Watts, and output voltage is 24VDC, and the output current is 14.6A WIRING DIAGRAM(This is just a refenrence, not representing this item): MORE QUTITIES, MORE DIACOUNTS!! There are many kinds of CNC Routers/Kits which are promoted!! If you have interested in any one of them, please don’t hesitate to buy it now. Whats more, our products are mainly used in CNC machine, Carver machine, Automazation, Printer, Stage lighting and so on. If you have any questions about our products, please dont hesitate to contact me. And I will try my best to support you. Currently we are looking for a qualified stocking distributors from all over the world with competitive price and good discounts for mutually benifitial long-term relationship. Please join us and let us creat a golorous futures together.

Frequently Asked Questions About 3 axis Nema 23 Stepper Motor 270oz-in 3A +3 Axis Driver Board CNC Kit hobby in My Website

www.fibusfamilyfoundation.org is the best online shopping platform where you can buy 3 axis Nema 23 Stepper Motor 270oz-in 3A +3 Axis Driver Board CNC Kit hobby from renowned brand(s). www.fibusfamilyfoundation.org delivers the most unique and largest selection of products from across the world especially from the US, UK and India at best prices and the fastest delivery time.

What are the best-selling 3 axis Nema 23 Stepper Motor 270oz-in 3A +3 Axis Driver Board CNC Kit hobby on www.fibusfamilyfoundation.org?

Frequently Asked Questions About 3 axis Nema 23 Stepper Motor 270oz-in 3A +3 Axis Driver Board CNC Kit hobby in My Website

What are the best-selling 3 axis Nema 23 Stepper Motor 270oz-in 3A +3 Axis Driver Board CNC Kit hobby on www.fibusfamilyfoundation.org?

Leave a Reply Cancel reply