JConcepts Aluminum Camber Gauge (85mm) (Blue) JCO2283-1

$35.7 Buy It Now or Best Offer
free,30-Day Returns

Seller Store excelrc
(6234) 99.4%,

Location: Garden City, Michigan
Ships to: US,
Item: 256602714268

Return shipping will be paid by:Seller
All returns accepted:Returns Accepted
Item must be returned within:30 Days
Refund will be given as:Money back or replacement (buyer’s choice)
Return policy details:
JConcepts:JConcepts
Country of Origin:US
Country/Region of Manufacture:US
Item Height:0.50 in
Item Length:1.00 in
Item Type:Part – NDA
Item Weight:0.5 lb
Item Width:10.00 in
MPN:JCO2283-1
JCO2283-1:JCO2283-1
Part Type:Part – NDA

JConcepts Aluminum Camber Gauge (85mm) (Blue) JCO2283-1 The next generation of 1/10th off-road racing revolves around setup, precision and accuracy. The JConcepts camber gauge, manufactured from billet aluminum material is brilliantly machined to high specifications and anodized to a luster. The detailed instrument is available in either blue or black anodizing and laser etched with graduated measurements from -10 to +10 degrees for a complete range of camber adjustments. The camber gauge comes preassembled with 4mm hardware for the pivot and thumbscrew as the setting knob. The structure features chamfered silver edging, highlighting the design. The alignment arm on the gauge is heavily chamfered which creates the perfect touch point against the tire and wheel. Each gauge comes in a latch box with foam insert which fits snugly around the instrument with heavy cushion. When racing gets serious, get precise with JConcepts. Every setup sheet contains camber information and the only way to achieve it properly is with a trusty gauge. The gauge simply operates with 2 pivoting pieces which can be secured by using the thumbscrew. Checking the camber starts by setting the vehicle at running height on a flat surface and viewing, by eye, the front-end of the vehicle. If the visual camber is close, slide the gauge over to the base of the front tire and pivot the arm up until it touches the tire or wheel surface. At the touch point, secure the thumb screw on the gauge and check the etched marking. Adjust the camber link turnbuckles and repeat for all 4 corners until the desired camber is achieved. To set camber, secure the thumbscrew on the etched number which is preferred. Slide the gauge over to the base of the front tire and watch for the touch point of the gauge against the tire. If the gauge touches at the top first you must add negative camber to get within the range of your setting. If the gauge touches at the bottom first you’ll need to add positive camber to move within range. After adjustments are made, fine tune until the tire rests top and bottom against the gauge and repeat for all 4 corners until the desired camber is achieved. Features: Pre-assembled, lightweight, aluminum construction Available in blue or black anodizing Laser etched graduated measurements Highly chamfered alignment arm as a touch off point Chamfer highlighted edging Included latch box with foam cushion JConcepts Aluminum Camber Gauge (85mm) (Blue) JCO2283-1 The next generation of 1/10th off-road racing revolves around setup, precision and accuracy. The JConcepts camber gauge, manufactured from billet aluminum material is brilliantly machined to high specifications and anodized to a luster. The detailed instrument is available in either blue or black anodizing and laser etched with graduated measurements from -10 to +10 degrees for a complete range of camber adjustments. The camber gauge comes preassembled with 4mm hardware for the pivot and thumbscrew as the setting knob. The structure features chamfered silver edging, highlighting the design. The alignment arm on the gauge is heavily chamfered which creates the perfect touch point against the tire and wheel. Each gauge comes in a latch box with foam insert which fits snugly around the instrument with heavy cushion. When racing gets serious, get precise with JConcepts. Every setup sheet contains camber information and the only way to achieve it properly is with a trusty gauge. The gauge simply operates with 2 pivoting pieces which can be secured by using the thumbscrew. Checking the camber starts by setting the vehicle at running height on a flat surface and viewing, by eye, the front-end of the vehicle. If the visual camber is close, slide the gauge over to the base of the front tire and pivot the arm up until it touches the tire or wheel surface. At the touch point, secure the thumb screw on the gauge and check the etched marking. Adjust the camber link turnbuckles and repeat for all 4 corners until the desired camber is achieved. To set camber, secure the thumbscrew on the etched number which is preferred. Slide the gauge over to the base of the front tire and watch for the touch point of the gauge against the tire. If the gauge touches at the top first you must add negative camber to get within the range of your setting. If the gauge touches at the bottom first you’ll need to add positive camber to move within range. After adjustments are made, fine tune until the tire rests top and bottom against the gauge and repeat for all 4 corners until the desired camber is achieved. Features: Pre-assembled, lightweight, aluminum construction Available in blue or black anodizing Laser etched graduated measurements Highly chamfered alignment arm as a touch off point Chamfer highlighted edging Included latch box with foam cushion &times Buy now and save! Tell a friend Visit store Watch now Postage info Click the Postage tab above the listing description for more info We will combine shipping. Please request an Invoice or message us after purchase to adjust shipping charges. Additional delivery notes PICK UP OPTION Sorry, our items are NOT available for pick-up. PAYING VIA PAYPAL We accept PayPal on our all our items so you can shop with confidence. Simple choose the PayPal option when proceeding through the checkout. Additional Information No additional information at this time Ask seller a question You might also like Rakon CNC AL Propeller Guards (Green) – Blade Inductrix 31mm Rakon CNC AL Propeller Guards (Orange) – Blade Inductrix Rakon CNC AL Propeller Guards (Purple) – Blade Inductrix Rakon CNC AL 6mm Motor Mount Set – Blade Inductrix IDTX601 Contact To contact our Customer Service Team, simply click the button here and our Customer Service team will be happy to assist. Ask seller a question © Excel RC Postage Click the Postage tab above the listing description for more info We will combine shipping. Please request an Invoice or message us after purchase to adjust shipping charges. We do not ship to freight forwarding companies, we will not be responsible for any shipments once our tracking number shows the first delivery scan. Payment Accepted Payment Methods PayPal eBay Payments Returns Returns are accepted Items must be returned within 30 days of the auction ending Seller will pay for return shipping. Additional Information: Returns Accepted, Buyer, 30 Days, Money Back, International: Returns Accepted, Money back or replacement (buyer’s choice), 30 Days, Buyer eBay integration by

Frequently Asked Questions About JConcepts Aluminum Camber Gauge (85mm) (Blue) JCO2283-1 in My Website

www.fibusfamilyfoundation.org is the best online shopping platform where you can buy JConcepts Aluminum Camber Gauge (85mm) (Blue) JCO2283-1 from renowned brand(s). www.fibusfamilyfoundation.org delivers the most unique and largest selection of products from across the world especially from the US, UK and India at best prices and the fastest delivery time.

What are the best-selling JConcepts Aluminum Camber Gauge (85mm) (Blue) JCO2283-1 on www.fibusfamilyfoundation.org?

Frequently Asked Questions About JConcepts Aluminum Camber Gauge (85mm) (Blue) JCO2283-1 in My Website

What are the best-selling JConcepts Aluminum Camber Gauge (85mm) (Blue) JCO2283-1 on www.fibusfamilyfoundation.org?

Leave a Reply Cancel reply