keyless starter entry remote transmitter keyfob alarm start EZSDEI485 clicker

$62.21 Buy It Now or Best Offer
free,30-Day Returns

Seller Store u.s.autoparts
(15884) 97.7%,

Location: Wellsboro, Pennsylvania
Ships to: US,
Item: 334011126675

Restocking Fee:No
Return shipping will be paid by:Seller
Returns Accepted:Returns Accepted
Item must be returned within:30 Days
Refund will be given as:Money back or replacement (buyer’s choice)
Other Part Number:15 channel 550 HF 600 HF 700 HF 800 H
Warranty:Other
Sidewinder 6500 HF, 7000 HF:Viper 550 HF, 600 HF, 700 HF, 800 HF
PRE-OWNED AFTERMARKET REMOTE K:KEYLESS ENTRY FOB ALARM REPLACEMENT TRANSMITTER CL
Color:Black
Manufacturer Part Number:EZSDEI485 EZSDE1485 DT6D DT6D-1 DT4D DT4D-2
Placement on Vehicle:Front
WILL WORK WITH: Automate 7 HF:Valet 450R Python 1500 HF, 2000 HF, 3000 HF
viper:viper
Type:Wireless
Interchange Part Number:485T 485 T DT4DA 68 BILLION CODES 2/29 CODES 302
Part Brand:DEI
Surface Finish:4 BUTTONS I, II, III, IV RED LED LIGHT
Features:Remote Start
Stock #:610 “TW”
Country/Region of Manufacture:Unknown

Stock Photo See pictures for an example of what you will receive. One (1) Aftermarket Security Installed System remote keyless entry fob alarm controller Transmitter control clicker keyfob controller replacement Directed Electronics Inc. (DEI) Viper / Python / AutoMate FCC ID: EZSDEI485 Interchangeable FCC IDs: EZSDEI485 EZSDEI494 EZSDEI485 (Red LED) Part #: 485T Interchangeable Part #s: 484 494 485T (Red LED) Circuit board #: DT4D-1 Interchangeable Circuit Board #s: DT6D DT6D-1 DT4D DT4D-1 DT4D-2 DT4DA Frequency: 434 MHz LED color: Red Battery: 1:GP23A 4 buttons Item Specifications: This remote can have either symbol graphics on the buttons or Roman Numeral graphics. The style of graphic is irrelevant as they are the exact same remote and the buttons preform the exact same functions. These remotes were not made with symbol graphics for very long. Most of them have Roman Numerals (I, II, III, IV). Compatible w/ the following systems: Steal Stopper 90 Python 70 80 90 Sidewinder 7100 7200 Viper 300+ C 50 500+ Ultra 700 Ultra 800 Ultra 900 Programming Instructions: The vehicle’s system can store up to 4 transmitters (remotes) into memory. Use the following programming routine to add transmitters to the vehicle’s security system or to change button assignments if desired. Using the optional DEI Bitwriter or PC Interface, the programming routine may be locked. Make sure the programming routine- is UNLOCKED before programming features of the system to the transmitter. If the horn generates one long chirp when attempting to program the transmitter, the programming routine is locked and must be unlocked using the DEI Bitwriter or PC Interface before proceeding. The Valet/Program switch, plugged into the blue port, is used for programming. There is a basic sequence of steps to remember whenever programming this unit: Door, Key, Choose, Hold Valet/Program switch while transmitting & Release. 1) Open a door on the vehicle. 2) Turn the ignition key to the ON position. 3) Within 10 seconds, press and release the Valet/Program switch the number of times that corresponds to the desired channel listed below. Once you have selected the channel, press the switch once more and HOLD it. The LED will flash and then the horn will chirp (if connected) to confirm the selected channel. Do not release the Valet/Program switch. a. PLEASE NOTE: If adding a remote to the system, a remote button must be taught to the unit in the Channel 1 or Channel 5 position PRIOR to programming other channels, unless using one of the Auto Program routines. CHANNEL # FUNCTION 1 Arm / Disarm / Panic 2 Channel 2 output 3 Channel 3 output 4 Channel 4 output 5 Arm only 6 Disarm only 7 Panic only 8 Auto Program separate arm/disarm/panic (Standard configuration) 9 Auto Program single-button arm/disarm/panic (single button configuration) 10 Delete all transmitters CHANNEL 10: If any transmitter button from a known transmitter is programmed to channel 10, all transmitters will be erased from memory. This is useful in cases when one of the customer’s transmitters is lost or stolen. This will erase any lost or stolen transmitters from your system’s memory. It can also be used to start from scratch if the transmitter buttons were programmed incorrectly. 4) While HOLDING the Valet/Program switch, press the button from the transmitter that you wish to assign to that channel. The horn will chirp indicating successful programming. It is not possible to teach a transmitter button to the system more than once. 5) Once the code is programmed, the Valet/Program button can be released. 6) Programming mode will be exited if one of the following actions occurs: a. Ignition key is turned to the OFF position b. Open door is closed c. Valet/Program switch is pressed too many times. d. More than 15 seconds elapses between programming steps. The horn will emit one long chirp when programming mode has been exited. How to find out if this remote is compatible with your Vehicles’ installed RKE System If you’re not sure your vehicle can use this remote, please ask questions or contact your local dealer first. 1. Check the back of your current or old keyless remote to match FCC ID /Part #’s. 2. Contact your local dealer and tell them your VIN# and ask what part # / FCC ID you need. Your vehicle will be installed with one of the following keyless entry systems: a. Standard Keyless Remote Packages: Installed at time of manufacture. b. Optional Keyless Remote Packages: Installed by a dealer. c. Aftermarket Keyless Remote Packages: Installed by previous owner or a car/audio shop. d. No remote keyless entry system at all. The above information can change which remote you need for your installed remote keyless system. Payment: We accept payment via PayPal or Credit Card. Please contact us via eBay messages for any questions concerning payments. Payment is expected within 5 days. PA SALES TAX: As per the State of PA Franchise Board we must collect sales tax from PA Residents for any purchase made from our store. Contact/Email: Due to scams etc, we DO NOT respond to emails. We only read/respond to EBAY MESSAGES. Messages & Best Offers are checked throughout the day & we typically respond 7 days a week. Please contact us with questions via eBay messages (keyless4u). 100% Guarantee Remote Shipping / Return Policy Warranty/Returns: We have a 30 day return policy. All returns for replacements and refund need an RMA #. Please contact us before returning items so we can give you the RMA # and the proper return address.No refunds / replacements will be granted without an RMA# We ensure proper working condition of all previously used or new remotes through a serious of tests performed with the Santronics Testing device. Each button is tested for functionality prior to shipment and then logged. Please Note: Each remote and circuit board is UV id’d prior to shipment – All returns receive a UV ID inspection to verify originality of remote sent prior to refund or replacement. Does this keyless remote entry come with a battery?

Frequently Asked Questions About keyless starter entry remote transmitter keyfob alarm start EZSDEI485 clicker in My Website

www.fibusfamilyfoundation.org is the best online shopping platform where you can buy keyless starter entry remote transmitter keyfob alarm start EZSDEI485 clicker from renowned brand(s). www.fibusfamilyfoundation.org delivers the most unique and largest selection of products from across the world especially from the US, UK and India at best prices and the fastest delivery time.

What are the best-selling keyless starter entry remote transmitter keyfob alarm start EZSDEI485 clicker on www.fibusfamilyfoundation.org?

Frequently Asked Questions About keyless starter entry remote transmitter keyfob alarm start EZSDEI485 clicker in My Website

What are the best-selling keyless starter entry remote transmitter keyfob alarm start EZSDEI485 clicker on www.fibusfamilyfoundation.org?

Leave a Reply Cancel reply