Kit Stator + Kokusan Flywheel + Regulator + Gasket For Aprilia RSV4 2011-2017

$390.02 Buy It Now or Best Offer
free,30-Day Returns

Seller Store rmstator-canada
(4612) 97.6%,

Location: Coaticook, QC
Ships to: US,
Item: 266039714718

Return shipping will be paid by:Seller
Returns Accepted:Returns Accepted
Item must be returned within:60 Days
Return policy details:
RMSTATOR:RMSTATOR
Manufacturer Part Number:RMS900-103809–M–A
OE/OEM Part Number:RMS900-103809
Manufacturer Warranty:2

Free shipping in USA 2 year warranty Same day shipping visit our store > find parts for : ATV / UTV / SXS Motorcycles Snowmobiles Watercraft Other Menu Store Home ATV / UTV / SXS Motorcycles Snowmobiles Watercraft Other IMPORTANT – Important notice about the product.–> &nbsp Please note: There are two possible kits for RSV4 engine. This kit ONLY fits RSV4 engine numbers HIGHER than 3413 with Kokusan flywheels. Please compare our flywheel to your original. If your RSV4 engine number is LOWER than 3413, your motor uses the Mitsubishi flywheel, and will need Stator Assembly 857201. See kit RMS900-104929 Recall-Type Stator + Kokusan Flywheel Rotor + Regulator + Gasket + Flywheel puller For Aprilia 2009-2020 RSV4 & 2011-2020 Tuono V4 Repl.# 2D000049 897479 Introducing our newest heavy-duty recall-type charging system upgrade kit for Aprilia 2009-2020 RSV4 & 2011-2020 Tuono V4. Anyone who rides or repairs Aprilia?s motorcycles is probably familiar with the stator, flywheel, and sometimes voltage regulator issues common to these models. Most of these bikes will have had at least one stator fail in its lifetime so far. The main problem was extremely strong magnets were used on the original flywheels, creating a very high power stator output, which generated excessive heat. This usually resulted in burned up, or shorted stator winding, and often in a failed voltage regulator. The solution was a new flywheel from Kokusan with lower strength magnets, dropping the stator output and heat generation. This results in a charging system output perfectly matched for the bike?s electronic needs, and long term reliability of the stator and voltage regulator. To prevent or correct the flywheel problems, our engineers at RMS Labs have come up with a complete reliable heavy-duty charging system replacement kit for your Aprilia. Upgrade today if you haven?t already! Included in this kit Heavy-duty Kokusan brand recall-type OEM flywheel Triple-tested heavy-duty stator Voltage regulator rectifier Crankcase cover gasket Flywheel puller With this kit, you will be able to upgrade your current failure-prone charging system with a heavy-duty version using the latest technologies Features Kokusan upgrade/recall type flywheel Lower-strength magnets for correct stator output, low heat generation, and long-term reliability. Built to OEM size Fits precisely in your ride: install it and forget it. Improved epoxy Uses high temperature epoxy that is stronger than OEM, eliminating the possibility of magnet detachment High grade steel capping Prevents harsh additives in motor oil from degrading the epoxy attaching the magnets. Though extremely unlikely, if a magnet did ever come loose, it would remain in the sleeve preventing contact with the stator. Precise balancing Eliminates crankshaft vibrations for longer engine longevity. Shop with confidence All products are tested. Don’t waste time with temporary solutions, and start fixing your ride like a pro! Packed with these technologies&nbsp –> Vehicle models fitment&nbsp Aprilia RSV4 1000 Factory — 2012-2017Aprilia RSV4 1100 Factory — 2019Aprilia RSV4 R 1000 — 2011-2015Aprilia RSV4 RF 1000 — 2015-2018Aprilia RSV4 RR 1000 — 2016-2019Aprilia Tuono V4 1000 — 2012-2014Aprilia Tuono V4 1100 — 2015-2017, 2020 OEM part replacement&nbsp RMS900-103809 Specifications&nbsp Stator Dimensions Interior diameter : 43 mm Exterior diameter : 105 mm Thickness : 13.8 mm Length of wires stator to grommet : 125 mm Length of wires grommet to plug : 320 mm Other specifications : Number of wires : 3 Number of plugs : 1 Number of pins : 3 Wire to wire resistance : Alternator :Yellow to Yellow = 0.3 ohms +-20% Flywheel Dimensions Exterior Diameter #1: 121 mm Exterior Diameter #2: 119 mm Interior Diameter: 107 mm Interior Diameter Center Housing: 19.2 mm Exterior Diameter Center Housing: 34 mm Thickness (exterior): 35.3 mm Thickness (interior): 30.65 mm Voltage Regulator Dimensions Width: 80 mm Length: 110 mm Height: 28 mm Wires length: 150 & 400 mm Fixation holes center to center: 80 mm Other specifications: Number of plugs: 2 Number of pins: 7 Number of wires: 7 Minimum Charging Voltage: 14.5 V +- 0.5 V Maximum Charging Current: 50 A / 500 W Open Circuit Voltage: 15 V Operation Temperature: -20? C to 85? C Flywheel Puller Dimensions 36 mm x 1.5 right hand male Length: 60 mm Exterior Diameter: 47 mm Interior Diameter: 20 mm Exterior Diameter Center Housing: 37 mm instructions&nbsp Before installing your new stator Check the AC output of the stator Replace any burned or corroded connectors on stator and regulator rectifier Check and repair any melted wiring Use hi-temp dielectric grease on all connectors Our stator may use a different wire color code than your original. All the wires are installed in the correct order; please do not change any of the wiring configurations. This stator is designed as a direct plug-in replacement and should be used as such. When bolting stator in, always use locking compound. If our stator includes a pickup coil, always make sure the air gap is correct upon installation; we suggest as close as possible no less than 0.010″. Before installing your new voltage regulator rectifier: Check the AC output of the stator. Replace any burned or corroded connectors on stator and regulator rectifier. Check and repair any melted wiring. Use hi-temp dielectric grease on all connectors. Flywheel : Before attempting to start your Aprilia adjusting the air gap is necessary. Rotate the flywheel so the raised node is lined up with the pick up/pulsar coil and adjust as close as possible but no less than 0.010″. Flywheel Puller : Removing a Powersport Vehicle’s Flywheel / Rotor: How it Works Flywheel Pullers are very versatile engine service tools and are a must in every toolbox. Our large selection of best selling rotor and flywheel pullers fit just about any motorcycle or ATV. Flywheel pullers are very simple to use, having only an outer body to hold the flywheel and a screw to push on the crankshaft. Some are even simpler, having only a bolt to thread into the flywheel. A taper holds the flywheel or rotor and the crankshaft together. The flywheel is secured to the shaft by applying torque to the fixing bolt. An Important Component to use Many flywheel or rotor puller tools will include a small cap. This is a crankshaft thread protector, and should always be used if it is included with the puller. You slip this cap onto the end of the inner piece of the puller which presses against the tip of the crankshaft. This keeps the fine threads from being stripped or damaged while removing the flywheel or rotor. Actions to Avoid Most of the time, removing a flywheel or rotor is painless. But sometimes corrosion, over-torquing the fixing bolt or heat-cycling can give you a hard time removing the flywheel. We too often see mechanics use a larger breaker bar or air impact tools to ease the flywheel off. These two techniques will damage the flywheel, the flywheel puller or the crank. Avoid using them if you want to keep it cheap. Tips to break a stuck flywheel loose: Torque Wrench How do you know if it’s stuck? You simply have to set your torque wrench to 50 ft-lbs and try to ease the flywheel off. If the flywheel is not stuck, you should be able to remove it with even less torque than this. If it is stuck, don’t use more torque or you might break your wrench. Ball Peen Hammer If 50 ft-lbs does not do the trick, go fetch something like a 12 or 16 oz ball peen hammer. Hit the end of the flywheel puller with a medium blow. Many times, the shock you create will successfully remove your flywheel. Be prepared to catch the flywheel since the shock of the hammer can make the flywheel jump off. Once again, getting into that situation will be pricey. And don’t forget your safety glasses. Propane Torch The hammer is not a be-all, end-all solution. Sometimes, you will have to find something more powerful, and that’s where the propane torch comes in. As a last resort solution, the heat should expand the flywheel but not the crank, since it is too massive to expand as fast. That way, the flywheel will become looser and will come off easier. Important Security Tips: In order to not set fire to your garage, your vehicle or yourself, certain precautions are necessary prior to heating the flywheel: Clean any oil or flammable liquids off the flywheel; Make sure your work area is free of any flammable liquids and that you work in a well ventilated area; Make sure to remove the gas tank, and set it aside at a safe distance. Make sure the flame of your torch is focused, and heat only the center of the flywheel. This is due to the fact that some flywheels use adhesive or other fixing compounds to locate the magnets in the rim that can be damaged by concentrated heat. Here again, the wheel might fall off the crank, so be prepared to catch it. And remember that you just heated it, so make sure you can catch it without burning yourself. With these tips and techniques, you are now equipped to handle any stuck flywheel without throwing your flywheel puller at it; unless you have a habit of working with machines that have been in a lake for months! Videos Watch Evan, head of engineering at RMSTATOR, explaining the installation process behind this product. Learn more about RMSTATOR improved flywheels. Learn more about the great company that is RMSTATOR™. Learn more why and how to repair melted or corroded connectors. RMSTATOR around the world Add a map to your own listings. FREE Trial! customer service AsK seller a question duties & taxes International Buyers: Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyer’s responsibility. More than 20 years of assisting mechanics around the world resolving the worst electrical problems made us know our stuff. When it comes to vehicle electrics, we definitively are the power in powersports. Customer service Part requestAbout usAbout seller pageAdd seller to favorite

Frequently Asked Questions About Kit Stator + Kokusan Flywheel + Regulator + Gasket For Aprilia RSV4 2011-2017 in My Website

www.fibusfamilyfoundation.org is the best online shopping platform where you can buy Kit Stator + Kokusan Flywheel + Regulator + Gasket For Aprilia RSV4 2011-2017 from renowned brand(s). www.fibusfamilyfoundation.org delivers the most unique and largest selection of products from across the world especially from the US, UK and India at best prices and the fastest delivery time.

What are the best-selling Kit Stator + Kokusan Flywheel + Regulator + Gasket For Aprilia RSV4 2011-2017 on www.fibusfamilyfoundation.org?

Frequently Asked Questions About Kit Stator + Kokusan Flywheel + Regulator + Gasket For Aprilia RSV4 2011-2017 in My Website

What are the best-selling Kit Stator + Kokusan Flywheel + Regulator + Gasket For Aprilia RSV4 2011-2017 on www.fibusfamilyfoundation.org?

Leave a Reply Cancel reply