Radio Flyer Lowering Kit for Model 18 Wagons Custom – "Standard Kit" – Prototype

Radio Flyer Lowering Kit for Model 18 Wagons Custom -

$250.0 Buy It Now or Best Offer
free,30-Day Returns

Seller Store lekgleo.mustang
(206) 100.0%,

Location: Walla Walla, Washington
Ships to: US,
Item: 295963206099

All returns accepted:ReturnsNotAccepted
Unbranded:Unbranded
Age Level:1-2 Years,3-4 Years,4-7,8-11 Years

Radio Flyer Lowering Kit for Model 18 Wagons, this is for a prototype skid plate with latest axle style design. Plate has minor dents and imperfections from fabrication and testing. See photos for exact details of skid plate. (Images with yellow background are reference of non prototype kit.) Condition listed as used due to more ware and tear on skid plate than a new plate would have. Still has brand new hardware and axle towers too. Skid plate functions just fine but is a slightly different shape and has 2 bend marks instead of 1 on each side of the skid plate nose area. See images for details that differ from general description below. Kit still holds up 150 pounds and functions in much the same way. Questions or requests, just send me a message and I’ll get back to you as soon as I can. Check out Facebook page NLIDLFCW for more photos of cambered and standard axle styles. Use this website for messaging though, I don’t always get the Facebook messages so response time on those is unreliable. No sales will be through Facebook, Buyer and Seller protection is better via this online listing. _______________________________________________________________NOT part of the kit: 1 Radio Flyer or similar wagon, that contains the front axle and the pan along with a handle and 4 wheels. 1 or more kids (or adults under the weight limit) Some time to assemble the kit, should take around 20 minutes to fully assemble the kit depending on if you’re mounting the ATW wagon or basic model 18 style and how attentive you are to assembly instructions. (Hint: Mounting the pan to the skid plate is the very last step before you’re ready to test it out.) Basic hand tools, wrench, screw driver, hex key (drill and drill bit if mounting an alternate wagon brand.) _______________________________________________________________Description: This is a custom made lowering kit for the Radio Flyer model 18 wagon with the wide pan lip and all the parts needed to lower your own Radio Flyer. This comes with all the parts needed to lower your own Radio Flyer but does not come with any of the Radio Flyer parts. This kit uses aluminum for the skid plate and rear axle holders with a stainless rear axle shaft and zinc plated steel nuts. The rear axles also have an open design to help prevent debris and water from collecting in a pocket. The care put into this design has created a lowering kit that will outlast the Radio Flyer Wagon, so long as it doesn’t get ran over, but if you are in need of replacement parts message us and we can get you what you need. The entire assembly can be flipped over to create a flatbed wagon for those bulky items. The weight limit is 150 lbs due to the fact the plastic bearing of the Radio Flyer wheels are not designed for any heavier loads. We put in the extra effort to test multiple materials and thicknesses and keep it light weight to create our lowering kits with a turning radius of less than 6 feet. Most of our comparisons are between our 3/16″ steel plate prototype and our old axle design from our first generation lowering kit that also used 1/4″ aluminum as the main plate. The new 2021 style axle mounts still bolt directly to our older 2018 and 2015 skid plates, no drilling or other modifications needed. Other customers have modified their kit or radio flyer parts to work with the Ranger Wagon, All Terrain Wagon and other brands of wagons. If you are wondering if your existing wagon will work with this kit feel free to message me in Etsy or Facebook and be prepared to do some measurements on your wagon. We do have some general clearance measurements you can reference on our Facebook site. Some customers even mount a pedal car or alternate ride onto this simple lowering kit. _______________________________________________________________Key Features: Aluminum skid plate is about 12 lbs. New sleek and more rigid designIn-stock and ships in less than a weekStronger than a steel version with 165 lbs load. Less than half the weight of a steel skid plate. Corrosion resistant, that is just what aluminum is. Hidden rear axle bolts. Open design rear axles to help avoid collecting debris and water _______________________________________________________________Specs: Compatible with: Model 18 Radio Flyer Wagon, though other styles and brands have been modified to fit by other customers. If you want a hole layout pattern on this kit check out my Facebook page and scroll through the profile pictures NLIDLFCW.Ground Clearance Empty: 1.25″ to the under side of the Skid Plate and 1″ to the bolts that hold the Radio Flyer Pan to the Skid Plate.Ground Clearance Over-Loaded: Lowest point is 1/2″ with an even load of 165 lbsWeight Limit: 150 lbs which is the same as the Radio Flyer manufacture states. Our tests have shown this kit can hold over a 200 pound person standing on the weakest point and still only flex just over 1/2 inch.Fabrication: Built and designed by the same fabricators of the original aluminum model with the same high quality cutting using the Water Jet at David’s Aquacut & Builders. Dimensions: Fits in a 54″ x 23.25″ x 9.25″ space when assembled (width varies on wagon style and lowering kit option), if front axle is removed the length becomes less than 48″ to help fit it inside your vehicle for transport.The new 2021 style axle mounts still bolt directly to our older 2015 skid plates, no drilling or other modifications needed. Package of a Skid Plate and Axle set is about 18 pounds in a box approximately 3″ x 20″ x 46″ We do not use tape on our parts inside the shipping box, we keep it clean with using only cardboard and plastic wrap to hold the items securely in place for shipping. _______________________________________________________________Manufacture: Made in USA Designed and built by Nathan, fabricator & Industrial Designer Graduate at Walla Walla University. _______________________________________________________________Payment: Please pay within 3 days of ordering for faster shipping. Orders don’t ship until payment is received. A special ad will be made for those who want to special order. _______________________________________________________________Shipping: If it is for sale it is in-stock and ready to ship to you between 1-3 business days (Mon-Fri) after confirmation of payment. We do not use tape on our parts inside the shipping box, we keep it clean with using only cardboard and plastic wrap to hold the items securely in place for shipping. Shipping is as cost effective as possible using UPS or FedEx, with discounts for multiple orders. Message us for special discounts and options. Ships to:USA (Alaska and Hawaii require an additional fee, costs more to ship)Other countries require customer to pay for their own shipping label and any customs fees and we will stick it on our box and send it out to you. Please contact us before the order so we can be sure to wrap you kit up a bit more for the extend journey to you. _______________________________________________________________Returns: If we haven’t sent out the item when you request a cancelation we are willing to refund your purchase but not for custom orders, other wise all sales are final. But we are usually quite quick to ship out orders so be sure about your purchase before ordering and message us if you need help or have questions. If we sent you the incorrect item we will replace it, please inform us of the damaged or incorrect items with in 30 days of receiving your item. If product arrives damaged please let us know so we can resolve it with the shipping company as soon as possible. If you custom ordered then it will depend on what customizations were done to determine if full refund or partial refund is available, engraved names or similar modifications may be partly refundable. _______________________________________________________________Contact: Due to the fact that these are made after normal work hours and as a side hobby, we would appreciate to only communicate via this online message system. Thank you for your interest in our Lowered Radio Flyer Kits. Check in once in a while for our new designs and accessories.

Frequently Asked Questions About Radio Flyer Lowering Kit for Model 18 Wagons Custom – “Standard Kit” – Prototype in My Website

www.fibusfamilyfoundation.org is the best online shopping platform where you can buy Radio Flyer Lowering Kit for Model 18 Wagons Custom – “Standard Kit” – Prototype from renowned brand(s). www.fibusfamilyfoundation.org delivers the most unique and largest selection of products from across the world especially from the US, UK and India at best prices and the fastest delivery time.

What are the best-selling Radio Flyer Lowering Kit for Model 18 Wagons Custom – “Standard Kit” – Prototype on www.fibusfamilyfoundation.org?

Frequently Asked Questions About Radio Flyer Lowering Kit for Model 18 Wagons Custom – “Standard Kit” – Prototype in My Website

What are the best-selling Radio Flyer Lowering Kit for Model 18 Wagons Custom – “Standard Kit” – Prototype on www.fibusfamilyfoundation.org?

Leave a Reply Cancel reply