【US】CNC 4.5KW BT30 ATC Air Cooled Spindle Motor 220V Kit + 5.5KW FL Inverter vfd

$2039.0 Buy It Now or Best Offer
free,30-Day Returns

Seller Store kuku86
(220) 94.0%,

Location: New York, United States
Ships to: US,
Item: 385203083407

Condition:New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is … Read moreabout the conditionNew: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller’s listing for full details. See all condition definitionsopens in a new window or tab
Non-Domestic Product:No
Torque:3.6 Nm (Torque peaked at 12000 rpm)
Cooling:Air cooled
Custom Bundle:No
Operating Speed:12000~24000rpm/min
MPN:Does not apply
Item Type:4.5KW ATC
Modified Item:No
Bearing:4pcs 2*7008 2*7006 bearing
RATTM MOTOR:RATTM MOTOR
Pole number:4
Voltage:220V OR 380V
4.5KW air-cooled ATC spindle:4.5KW air-cooled ATC spindle
Inverter VFD:Fuling Brand 5.5KW
Frequency:800Hz
Country/Region of Manufacture:China
Power:4.5KW
UPC:Does not apply

eBay Package include: 1 x 4.5KW ATC Air cooled spindle motor ( BT30,24000rpm,4 bearings,800Hz, 220V ) 1 x BT300 Tool holder 1 x FuLing Brand 5.5KW 220V Inverter VFD 1 x Aviation plug Note: We also have 380V,if you need,pls contact us before purchase.Default is 220V. （380V style has stock in EU warehouse, 220V style has stock in US warehouse.） English manual will be sent via E-mail,pls leave ur e-mail ID after purchase, thank u. 100% Brand New and High Quality!!! Product Description 4.5kw air-cooled automatic tool change spindle is a high-end woodworking company designed to develop high-power electric spindle bearings imported fom Germany, high-precision bearings, high precision, long life. The electric spindle fan cooling with Road gas seal structure, automatic tool changer with ISO30 shank, feast automatic tool change and improve the efficiency of the automated processing. Procuct Name 4.5KW air-cooled ATC spindle Power 4.5KW Voltage 380V(220V also in stock) Torque 3.6 Nm (Torque peaked at 12000 rpm) Speed 12000~24000rpm/min Frequency 800Hz Current 8A Collet ISO30 Pole number 4 Cooling Type air cooling Barometric pressure 6 bar Fixed way Two side,screw fixed Number of phases 3 Bearing 2*7008 2*7006 Warranty 1 year Packing list 1pcs spindle The usages of the product and warnings Matters need attention when you install this spindle 1. When installed, please carefully, pay attention to personal safety and to avoid injuries occurred during the installed process; 2. Do not use any tools tapping spindle; 3. Do not use sandpaper and grinding wheel to wipe or grind in axis core and taper hole; 4. Use special removal tool to remov the lock nut and the tool; 5. Untrained personnel can not disassemble and operate electric spindle; Attention to maintenance and maintenance 1. Electric spindle storage temperature is 20 ℃ ± 10 ℃, humidity ≦ 85%, to allow time to store up to three months; 2. Electric spindle most suitable ambient temperature is 20 ℃ ± 10 ℃, bearing life can achieve the desired optimum value; 3. The power cord must take waterproof measure, electric spindle housing must be grounded; 4. Electro-spindle must not exceed nameplate parameters;. 5. Not allowed to use any mechanical way to forced braking in the shaft; 6. after using the spindle every day,you should wipe spindle taper,then smear with rust oil; 7. Workplace must be clean, there should be strict dust control measures to prevent foreign matter enter the spindle. Product common malfunctions&method of exclusion Fault phenomenon Reason Method of exclusion Electric spindle is not running after boot 1、No inverter power output or set incorrectly Check that VFD supply three-phase output voltage and setting method 2、Spindle plug is not inserted Check the electrical spindle plug and connection. 3、Bad plug connector 4、Bad stator line package Replace line package Shutdown after a few seconds of the boot 1、Start time is too short Increase the acceleration time 2、Electric spindle high temperature cause line package insulation damaged Replace line package 3、Electric spindle lose phase to run,then cause overcurrent protection blackout Check the electric spindle connection Electric spindle smoking or the housing hot after a few second of the boot 1、Inverter output voltage, frequency are not match the use of electric spindle voltage and frequency Check the VFD and the spindle voltage, frequency 2、The VFD is not set correctly Reset the VFD Locking nut loose when it is started Wrong direction of rotation Change the direction of rotation Spindle have big noise and vibration 1、Bearing wear seriously Replace the bearing 2、Precision of parts damaged,it’s effect dynamic balance Calibration of dynamic balance 3、Big beat of Spindle Replace the spindle Locking nut loose when it is stoped Stop time is too short Increase the deceleration time Shipping Please open the package and check if there are some damages before sign, if there are some damages , please do not sign and contact us immediately We ship to worldwidebut If your country’s custom is strict, please contact us before you bid to check detail and confirmed. Delievry time USA post service round 10-18 business days Canada China post round 25-40 business days Australia China post round 20-35 business days Western EU(Germany,UK,France, etc) China post 20-35 business days Asia,South America,other countries Chins post round 15-40 business days Note:above offer is default delivery way,if you need fast delivery like as DHL/UPS or post service pls inform us to confirm the shipping cost before you bid Above DHL/UPS offer is without remote fee,if your post code is remote it need extra cost. All items will be shipped within 1-3 business days upon receipt of payment Payment We accept paypal payment,all Paypal must be confirmed(shipping and billing address must match and correct and it need tell us your telephone no for delivery) Payment must be made within 48hours of the auction end time Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer responsibility. Problem&Feedback Please give us the opportunityto resolve any problem when you have,we concern your problem and we will try our best to resolve it. We are a new member in ebay now,and need understand both of sides Pls email us before you want to leave any negative feedback Refund When you have the parcel,and not satisfied the goods or it is other problem like as broken,pls tell us the detail reason and provide the photos,after confirm we will refund your money,but the delivery charge paid by buyer. Contact us Welcome worldwide customer inquire and questions,we will try to do our best to feedback customer’s email within 1-2 business days,if not pls check the mail box again Customer’s satisfaction is very important to us.

Frequently Asked Questions About 【US】CNC 4.5KW BT30 ATC Air Cooled Spindle Motor 220V Kit + 5.5KW FL Inverter vfd in My Website

www.fibusfamilyfoundation.org is the best online shopping platform where you can buy 【US】CNC 4.5KW BT30 ATC Air Cooled Spindle Motor 220V Kit + 5.5KW FL Inverter vfd from renowned brand(s). www.fibusfamilyfoundation.org delivers the most unique and largest selection of products from across the world especially from the US, UK and India at best prices and the fastest delivery time.

What are the best-selling 【US】CNC 4.5KW BT30 ATC Air Cooled Spindle Motor 220V Kit + 5.5KW FL Inverter vfd on www.fibusfamilyfoundation.org?

Frequently Asked Questions About 【US】CNC 4.5KW BT30 ATC Air Cooled Spindle Motor 220V Kit + 5.5KW FL Inverter vfd in My Website

What are the best-selling 【US】CNC 4.5KW BT30 ATC Air Cooled Spindle Motor 220V Kit + 5.5KW FL Inverter vfd on www.fibusfamilyfoundation.org?

Leave a Reply Cancel reply